After that, you only need to change the settings related to graphics in the ist file. If you copy and move the attached EFIafter installing macOS, the core files are already installed. If you want to use external graphics as main, set PEG / PCIe Slot 1) Graphics: IGD/Integrated/iGPU/CPU Graphics (If there is only built-in graphics, this is how to set it.It is recommended to set it at the time of installation as already explained in the BIOS setup above. It seems as important as it seems to be essential for users who are using Nvidia cards as main.įirst, you need to enable the integrated graphics card. Therefore, if the built-in graphics are enabled, it can greatly reduce the CPU load and improve the rendering speed. In particular, H.264 or H.265 (HEVC), which boasts a superior compression ratio among editing codecs, is heavily influenced by the CPU. Of course, the built-in graphics card cannot be used for games or editing, but thanks to the day-to-day development, it has evolved to be able to play low-end games and simple editing. Intel’s i3, i5, and i7 series, which we commonly say, have their own built-in graphics cards for each generation. Enable iGPU (Intel Integrated Graphics).You only have to set it aside from sleep/wake or built-in graphics. It does not need drivers and performance is better than Nvidia. For AMD, nothing else can be set for the current RX Vega 64 and lower HD series. However, since 7 series, web driver should be installed, and whenever the OS is updated, the appropriate web driver must be installed to use the graphics card with proper performance. If you currently use AMD’s graphics card, you do not need to set special EFIsettings, but Nvidia needs to install a web driver, and if you have Intel built-in graphics, you need to change the device ID.įor Nvidia graphics, drivers up to 6 series are natively identified without the need for driver installation. Enter the BIOS setup and change the boot order to MacOS installed disk to the priority boot. Now you can boot to the hard disk where you installed macOS without booting to the USB drive. Install for UEFI booting only, Install Clover in the ESP, Dirver64UEFI>EmuVariableUefi-64, OsxAptioFix2Drv-64, Install RC scripts on Target volume.When installing the clover, click Customize and select the options as shown below.In the Clover, Configurator select Install/Update Clover and install the latest one.Open Partition, download the EFIfolder and copy and paste it.Mount EFI to mount the partition where macOS is installed.After completing the setup, replace the EFI folder so that you can boot by yourself. Once you have made the various settings (do not set the Internet yet), the Sierra desktop will open.Select the installed macOS and press Enter to display the High Sierra initial setting screen.Once the macOS installation is complete, it automatically reboots and the clover boot screen appears again. Then the installation continues as shown below. When the installation is finished, it will be restarted and you will see the name of the newly installed macOS in the clover boot menu.
0 Comments
Leave a Reply. |